PISTON SEAL MA23

STANDARD SEAL DIMENSIONS

DESCRIPTION

The MA23 seal has been specifically designed either for pneumatic compact short stroke cylinders and single/double effect cylinders. The guiding element is integrated on the seal. Specific notches keep the lubricant grease maintaining a sliding effect on the piston for long time. The magnet is located between the two opposed gaskets. For specific needs or problems, our technical office is at your complete disposal with tailor made solutions.

TECHNICAL DATA

Pressure: < 20 bar Speed: < 1 m/s Temperature: from -30° C up to +90° C Fluids: air with or without lubrication, mineral oils or grease

MATERIAL

Standard polyurethane 90 Shore A.
Alternative polyurethane 85 Shore A.

ASSEMBLING

It is important to remove flashes or cutting edges in the housing to avoid damages. The installation is made by overlapping the seal on the piston diameter. Warning: the piston must be correctly shaped according to the drawing of the MPS dimensions table.