WIPER PO16

STANDARD SEAL DIMENSIONS

DESCRIPTION

The PO16 wiper has a high flexible wiping lip on the dynamic side and a strong, shorter, protruding lip on the static side. This special profile keeps the rod and the static side where it is housed free from any impurity, waste or water. Impurities would damage the seal and corrode the inner part of the cylinder.

TECHNICAL DATA

Speed: < 1 m/s
Temperature: from – 35° C to + 100° C with peaks till +110° C
Fluids: water at room temperature, mineral oils

MATERIAL

The material used is a polyurethane with a high modulus of elasticity, low compression set and high wear resistance. Its hardness is 93 Shore A ± 2.

ASSEMBLING

It is not very problematic as it can be done in semiopen groove located in the nearest part outside the cylinder. Remove cutting edges and flashes to avoid the scratching of the wiper during the installation.