WIPER PO21

STANDARD SEAL DIMENSIONS

DESCRIPTION

The main characteristic of the hooked profile of the PO21 wiper is to enable easy and fast installation into a complete open housing, both automatically and manually. The groove is completely open with a lateral milling, which allows the wiper to be replaced easily. The special profile combining seal and wiper is very strong and allows important rod misalignments without any danger of ejection from the seat. Moreover, the static lips profile keeps the cylinder free from outside impurities.

TECHNICAL DATA

Pressure: < 20 bar
Speed: < 1 m/s
Temperature: from – 30° C up to + 90° C
Fluids: air with or without lubrication, mineral oils or grease

MATERIAL

Standard polyurethane 90 Shore A.
Alternative polyurethane 93 Shore A.

ASSEMBLING

The wiper should be lubricated internally during installation. The external lubrication of the wiper and housing is not recommended due to the extrusion risk of the wiper. It is important to remove cutting edges and flashes in the housing to prevent damages of seal during assembling.