ROD SEAL KO15

STANDARD SEAL DIMENSIONS

DESCRIPTION

The KO15 seal type is similar to the KO10 type, but on the dynamic side, it presents a multifunctional double lip which:
– reduces stick-slip effects thanks because it keeps oil between the secondary lip and the main one;
– stops any external impurities;
– faces the material shrinkage at low temperatures;
– acts as a stabilizer.

TECHNICAL DATA

Pressure: < 400 bar at a temperature of 60° C
Speed: < 0.5 m/s
Temperature: from – 35° C to + 100° C with peaks till 110° C
Fluids: mineral fluids and oils

MATERIAL

The proposed material is polyurethane, with high elasticity modulus, low compression-set and high abrasion resistance. The hardness is 93 Shore A ± 2.

ASSEMBLING

To prevent any damage to the seal, remove any flash and cutting edges in the housing and on the rod. The seal should always be lubricated before assembling in order to have easier insertion of the rod.