ROD SEAL MA1

STANDARD SEAL DIMENSIONS

DESCRIPTION

The MA1 seal has a dynamic lip shorter than the static one and it is used in cases of high rod misalignments and possible high pressure.

TECHNICAL DATA

Pressure: < 400 bar, at a temperature of 60° C
Speed: < 0.5 m/s
Temperature: from – 35° C to + 100° C, with peaks up to 110° C
Fluids: mineral hydraulic fluids

MATERIAL

The proposed material is polyurethane, with high elasticity modulus, low compression-set and high abrasion resistance.
The hardness is 93 Shore A ± 2.

ASSEMBLING

To prevent any damage to the seal, remove any flash and cutting edges in the housing and on the rod. The seal should always be lubricated before assembling in order to have easier insertion of the rod.