ROD SEAL MA24

STANDARD SEAL DIMENSIONS

DESCRIPTION

The MA24 seal type is similar to the MA5 type with anti-extrusion ring. This seal is recommended when the coupling clearance between the head and the rod cannot be reduced and in the event of high pressure peaks.

TECHNICAL DATA

Pressure: 400 bar with peaks till 500 bar at 60°C
Speed : < 0.5 [m/s] Temperature: – 35 °C . +100 °C with peaks till +110°C
Fluids : mineral hydraulic fluids

MATERIAL

The proposed

MATERIAL

is polyurethane, with high elasticity modulus, low compression-set and high abrasion resistance. The hardness is 93 Shore A ± 2.

ASSEMBLING

To prevent any damage to the seal, remove any flash and cutting edges in the housing and on the rod. The seal should always be lubricated before

ASSEMBLING

in order to have easier insertion of the rod.